Large cast iron bending plate

The accuracy of large cast iron bending plates can be divided into levels 000,00,0,1,2,and 3.The selection of accuracy standards is generally determined according to the usage situation.Bends with a precision of level 3 or above are used for inspection,marking,assembly,etc.,while bends with a precision of level 4 or below are generally used for riveting,welding,etc.

Large cast iron bending plate:manufactured according to GB6092-85 standard,made of HT200-HT300 material,with a working surface using scraping and grinding technology,used for component inspection and clamping in mechanical processing.

Large cast iron bending plate:used to inspect the 90°angle of workpieces,check the mutual perpendicularity of related surfaces of components during equipment maintenance,and is also commonly used for marking by fitters.It can also be commonly used for inspection,installation,and vertical plane inspection of machine tools,and can check the verticality of workpieces on cast iron flat plates.It is suitable for mechanical and instrument inspection and inspection of non verticality between machine tools.

Precision of large cast iron bending plates:Level 1,Level 2,and Level 3.

What are the precautions for using large cast iron bent plates

1.Cast iron T-groove bent plates should not be used or stored in damp,corrosive,high or low temperature environments.When using,the cast iron bent plates should be installed and debugged first,and then the working surface of the bent plates should be wiped clean.Only after confirming that there are no problems can they be used.

2.When using,it is necessary to install and debug the bending plate,then wipe the working surface of the bending plate clean,and use the bending plate only after confirming that there are no problems.

Model and specifications of large cast iron bent plates: