Round adjustment pad

There are two structural forms of circular adjustment pad iron products: two layers and three layers, which are used for supporting, installing, and adjusting the level of machine tool equipment. The installation of the machine tool does not require the installation of anchor bolts to be fixed to the ground, with good vibration reduction and equivalent vertical deflection, making the machine tool stable on the ground. Save installation costs and shorten installation cycles. The position of the machine tool can be changed at any time according to production, and the cost of secondary installation makes it possible to install the machine tool upstairs. It can adjust the level of the machine tool, with a wide and convenient adjustment range. The shock-absorbing rubber pad is made of nitrile synthetic rubber, which is resistant to grease and coolant.

Place the adjusting sizing block under each stress point of the machine tool. After each sizing block is stressed, adjust the sizing block. The adjustable height is 3mm to 15mm, and the cast iron adjustable pad iron is easy to adjust and flexible to move. There is no need to drill holes or bury anchor screws, and it does not damage the ground. It is a major reform in the installation process of machine tools and equipment. It can improve the machining accuracy of machine tools through the dynamic characteristics of the same bed, and has the functions of shock resistance and noise reduction. Saving labor, time, materials, and overall economic benefits. Solved the contradiction of uncertain ground foundation caused by equipment selection difficulties for the design department. Widely versatile, suitable for installing various types of machine tools and equipment.